Filter
Top Products
Programming Function Blocks and Features
Video Recorder – User Manual 83
4.5 Set Mode
Select this item to change the operating mode of the instrument to Online, Program or Maintenance.
The top of the display will show which mode you have changed to.
Program mode
Program mode is an off-line mode for programming (configuring) the instrument. In this mode, all
outputs are frozen.
Online mode
Online Mode enables full use of the instrument with its inputs, outputs and internal programming. In this
mode, it is fully interactive with all externally connected elements.
Maintenance mode
Maintenance Mode is an off-line mode for maintaining proper and complete functioning of the
instrument. Functions include calibration, off-line diagnostic testing, and various setups for operation.
In Maintenance Mode, all outputs are frozen.
ATTENTION
Note: Changing to ONLINE mode by pressing any of the Display buttons can cause incorrect values to be
displayed. The values will correct themselves in a few seconds. To avoid this potential annoyance, change to
online mode through SET MODE instead of through the Display buttons.