Filter
Top Products
Programming Function Blocks and Features
Video Recorder – User Manual 158
Table 4-64 Assign Displays To Keys Prompts (continued)
Prompt Range/Selections Definition
DISPLAY 1
DISPLAY 2
.
.
.
DISPLAY 10
FORMAT Select one of the following display formats. The
corresponding format will be shown when the Display keys
are pressed.
V_TREND (Vertical Trend)
VTRNDDIG (Vertical Trend Digital)
VTRNDBAR (Vertical Trend Bar)
VT_6DIV (Vertical Trend-6 Division)
H_TREND (Horizontal Trend)
HTRNDDIG (Horizontal Trend Digital)
HTRNDBAR (Horizontal Trend Bar)
V_4_BAR (4-Point Vertical Bar Graph)
V_6_BAR (6-Point Vertical Bar Graph)
V_8_BAR (8-Point Vertical Bar Graph)
V_12_BAR (12-Point Vertical Bar Graph)
H_4_BAR (4-Point Horizontal Bar Graph)
H_6_BAR (6-Point Horizontal Bar Graph)
PANEL_4 (4-Point Panel Display)
UNIT DATA (Unit Data Display)
PANMETER (Panel Meter)
ALARMSUM (Alarm Summary)
STORAGE (Storage Status)
TOTAL (Display 1 totalizer)
TOTALIZR (Display all totalizers)
LOOP_BAR (Loop with Bar Graph)
LOOP_2BS (Loop with 2 Bar Graphs)
LOOP_3BS (Loop with 3 Bar Graphs)
LOOP_4BS (Loop 4 Bar Summary)
LOOP_8BS (Loop 8 Bar Summary)
SPP_2BS (Set point Profiles with 2 Bar Graphs)
SPP_3BS (Set point Profiles with 3 Bar Graphs)
SPP_4BS (Set point Profiles with 4 Bar Graphs)
SP_TREND (Set point Profile Trend)
PROSUM (Process Summary)
TREND Appears if a trend format is selected. Select trend data to be
displayed: TREND 1, TREND 2, TREND 3 or TREND 4
BARGRAPH Appears if a bar graph format is selected. Select bar graph
data to be displayed: BARGRAPH 1, BARGRAPH 2,
BARGRAPH 3 or BARGRAPH 4
ROTATION RATE Appears if trend, panel ,display or some bar formats are
selected. Select number of seconds each point on the panel
display will be shown: 1, 2, 3, 4, 5, 10, 15, 20, 30, 40, 50, 60
LOOP Appears if a loop format is selected. Select loop to be
displayed.
PROFILE Appears if Set point Profile Trend format is selected. Select
profile to be displayed.