Filter
Top Products
Setpoint Profiler
Video Recorder – User Manual 199
Table 5-8 Procedure To Load A Program From Memory Using Online Menu
Step Action Result/Notes
1 Press the Display button to change to online
mode.
An online display is shown.
2 Press the Menu button to display the online
menu.
Online menu is displayed.
3 Press Decrement button to highlight Setpoint
Profiles.
Cursor moves down.
4 Press Enter. Setpoint Profiles menu is displayed.
5 Press Decrement button to highlight Load
Program From Memory.
Prompt is highlighted.
6 Press Enter. Load Program sub-menu is displayed.
7 Press Enter to select Program Number prompt. Cursor moves to the right.
8 Press Increment or Decrement to select the
desired program number to be loaded.
Program number is displayed.
9 Press Enter to select. Program number is selected.
10 Press Enter again to load. Program is loaded from the disk to the
instrument.
Table 5-9 Procedure To Load A Program From Memory Using Point/Detail Menu
Step Action Result/Notes
1 Press the Display button to change to online
mode.
An online display is shown.
2 Press the Tab button to display the Point/Detail
menu.
Online menu is displayed.
3 Press Decrement button to highlight Setpoint
Profiles.
Cursor moves down.
4 Press Enter. Setpoint Profiles menu is displayed.
5 Press Decrement button to highlight Load
Program From Memory.
Prompt is highlighted.
6 Press Enter. Load Program sub-menu is displayed.
7 Press Enter to select Program Number prompt. Cursor moves to the right.
8 Press Increment or Decrement to select the
desired program number to be loaded.
Program number is displayed.
9 Press Enter to select. Program number is selected.
10 Press Enter again to load. Program is loaded from the disk to the
instrument.