Filter
Top Products
Programming and Operating Concepts
Video Recorder – User Manual 44
Table 3-1 Button functions (continued)
Symbol Name Function Operating mode in which
function applies
Program Online Maint
Auto/
Manual
• In a loop display, toggles loop between
Auto and Manual modes (loop's Force
Remote Manual discrete must be OFF).
• In a loop display, toggles loop between
Remote Manual and Manual modes
(loop's Remote Manual discrete must
be ON).
• Does not function if loop's Discrete vs.
Key discrete is ON. In this case, the
button's functioning has been
transferred to the loop's
Auto/Manual Select discrete.
#
#
#
ATTENTION
The following keys are like Digital Inputs on the keypad of the instrument. They must be configured as part of
the instrument’s function blocks in order to be active.
F1
F1
START
• When pressed, this key raises the SY1
F1 signal for 1 machine scan cycle.
• For instruments with the Setpoint
Profiler, user typically programs it to
Profiler Start input or Totalizer Reset.
#
F2
F2
HOLD
• When pressed, this key raises the SY1
F2 signal for 1 machine scan cycle.
• User typically programs it to Profiler
Hold input (Use Edge/Level input
selection) or to Totalizer Reset.
#
F3
F3
RESET
• When pressed, this key raises the SY1
F3 signal for 1 machine scan cycle.
• User typically programs it to Profiler
Reset input or Totalizer Reset.
#
F4
F4
• When pressed, this key raises the SY1
F4 signal for 1 machine cycle.
#
F5
F5
• When pressed, this key raises the SY1
F5 signal for 1 machine cycle.
#