Filter
Top Products
Programming Function Blocks and Features
Video Recorder – User Manual 127
Table 4-35 Periodic Timer Prompts
Prompt Range/Selections Definition
SET UP TIMER See Table 4-36 for prompts Selects the timer format.
Table 4-36 Set Up Timer Prompts
Prompt Range/Selections Definition
PHASE NONE, DAILY, WEEKLY,
MONTHLY
Select the timer format. Remaining prompts will vary per
phase selected.
PERIOD HOURS 0-23 Number of hours in the period
PERIOD MINUTES 0-59 Number of minutes in the period
PERIOD SECONDS 0-59 Number of seconds in the period
RESET OFF, discrete parameter, 0, 1 Phase NONE only. When this discrete is ON(1), timer stops
and resets to beginning of period. When discrete is OFF(0),
timer begins again.
START DAY MONDAY,
TUESDAY…SUNDAY
For Phase DAILY, select the day of the week to start the
timer.
1-31 For Phase MONTHLY, select the day of the month to start
the timer. If this number exceeds the number of days in any
given month, then the discrete switches ON(1) the last day
of that month.
START HOURS 0-23 Hours of the Start time.
START MINUTES 0-59 Minutes of the Start time.
START SECONDS 0-59 Seconds of the Start time.
ATTENTION
The Start Time’s value cannot exceed the Period. An error message is displayed if you enter a Start Time of 8:00:00
and a Period of 4:00:00, for example.