Filter
Top Products
Setpoint Profiler
Video Recorder – User Manual 193
Table 5-5 Edit Profile Prompts
Prompt Range/Selections Definition
RAMP TYPE VAL/DUR, TIME, RATE,
EXTERNAL
See 4 types of ramp segments on page 178.
TIME UNITS SECS, MINS, HOURS Select the time units to be used by all segments
of the profile.
EDIT SEGMENTS See Table 5-6.
GUAR SOAK LO LIM OFF or number The profiler will Hold if PV #1 or PV #2 deviates
more than this much below the profiler output.
See Guaranteed Soak on page 182 for details.
GUAR SOAK HI LIM OFF or number The profiler will Hold if PV #1 or PV #2 deviates
more than this much above the profiler output.
See Guaranteed Soak on page 182 for details.
HYSTERESIS OFF or number See Hysteresis on page 182 for details.
BATCH FIRST
SEGMENT
0-63 Specify the first segment of the batch phase.
Prior segments are the start-up phase. A value
of 0 indicates a single phase profile. See Two
types of profiles on page 177 for details.
BATCH LAST
SEGMENT
0-63 Specify the last segment of the batch phase.
Segments after this segment are the shutdown
phase. A value of 0 indicates a single phase
profile. See Two types of profiles on page 177
for details.
(continued)