Disabling Procedures
005 (continued)
Did the diagnostics run without error?
Yes No
006
Go to “Diagnostic and Exchange Result
Analysis 0000” on page 4-99.
007
– Note their positions and remove the modem or
line cables from the LIC.
– If the LIC is type 1 or 4, install the wrap plug
(PN 65X8927) on the uppermost socket. See
Figure 1-17 on page 1-76 and Figure 1-14 on
page 1-75.
– If the LIC is type 3, install the LIC wrap cable
(PN 65X8928) between the two sockets. See
Figure 1-17 on page 1-76 and Figure 1-15 on
page 1-75.
– If the LIC is type 5 or 6, unplug the line cable at
the customer wall frame and install the wrap
plug (PN 11F4815) on the uppermost socket of
the cassette. See Figure 1-18 on page 1-77
and Figure 1-16 on page 1-76.
Is the LIC type 1, 3, or 4?
Yes No
008
– Using the LID function, enter the line
address in the input area of the displayed
screen and record the line number dis-
played on the next sceen.
– Run only the RH59 routine of the concur-
rent TSS diagnostics using the number of
the suspected adapter, and the line
number recorded above, refer to
Figure 1-10 on page 1-72.
If necessary, refer to “How to Run Internal
Function Tests” on page 3-9.
Did the diagnostics run without error?
Yes No
009
Go to “Diagnostic and Exchange
Result Analysis 0000” on page 4-99.
010
– Change the wrap plug to the other socket,
if any (LIC type 5).
– Rerun the RH59 routine of the TSS diag-
nostics.
(Step 010 continues)
010 (continued)
Did the diagnostics run without error?
Yes No
011
Go to “Diagnostic and Exchange
Result Analysis 0000” on page 4-99.
012
No trouble was found with this LIC.
– Remove the wrap plug.
Go to “Diagnostic and Exchange Result
Analysis 0000” on page 4-99.
013
– Using the LID function, enter the line address in
the input area of the displayed screen and
record the line number displayed on the next
screen.
– Run only the RC01 routine of the concurrent
TSS diagnostics, using the number of the sus-
pected adapter, and the line number recorded
above. Refer to Figure 1-10 on page 1-72.
If necessary, refer to “How to Run Internal
Function Tests” on page 3-9.
Did the diagnostics run without error?
Yes No
014
Go to “Diagnostic and Exchange Result
Analysis 0000” on page 4-99.
015
Is the LIC type other than 3?
Yes No
016
Go to Step 024 on page 1-71.
017
Is the LIC type 1 or 4A?
Yes No
018
No trouble was found with this LIC.
– Remove the wrap plug and reconnect the
modem cable.
Go to “Diagnostic and Exchange Result
Analysis 0000” on page 4-99.
1-70 3745 Models 130 to 17A: MIP
