A SERVICE OF

logo

Open as PDF
next previous
3745 FRU Exchange Procedure
7. Attention: Use the ESD kit and procedures.
8. Refer to Figure 4-127 .
9. Check if the cassettes are labelled according
to their positions. If they are not, label them.
10. Remove the cassettes and store them in a
safe place.
11. Verify that the cables are labeled according to
their position. If they are not, label them.
12. Remove all the cables from the board.
Figure 4-127. MOSS Board Cards and Cables
Chapter 4. 3745 FRU Exchange 4-93