Filter
Top Products
3745 MAPs
3745 Control Panel Code
Notes:
1. Use the
Token-Ring Network Problem Determination Guide
, SX27-3710.
2. Check the ring and the service processor. Go to the
Service Processor Installation and Maintenance
manual, chapter "Service Processor Problem Determination".
Table 2-2. 3745 Control Panel Code
3745 Control
Panel Code
Description Action
B8F LAN adapter check Exchange the MLA card.
B90 Hardware init error Suspect a hardware problem (see Note 1).
B91 Microcode error Contact your support structure for assistance.
B92 Lobe media test failure Suspect a hardware problem (see Note 1).
B93 Signal loss while opening Suspect a ring problem (see Note 1).
B94 Wire fault while opening Suspect a hardware problem (see Note 1).
B95 Open frequency error Suspect a ring problem (see Note 1).
B96 Time out while opening
B97 Ring failure while opening
B98 Ring beaconing while open
B99 Duplicate node address
B9A Open request parameters
B9B Open remove received
B9C Open IMPL force received
B9D No monitor for RPL at open
B9E Lobe wire fault at open Suspect a hardware problem (see Note 1).
B9F Remote station connected
Time out
Suspect a problem in the service processor
or ring problem (see Note 2).
BB0 Link lost
BB1 DM/DISC received /acked
BB2 FRMR received
BB3 SABME received
BB4 Ti Timer expired
BB5 FMMR sent
BB6 Unexpected SABME received
BC0 Permanent ring beaconing Suspect a ring problem (see Note 1).
BC1 Lobe wire fault Suspect a hardware problem (see Note 1).
BC2 Auto-removal while
beaconing
BC3 Remove received Suspect ring problem (see Note 1)
BC4 Auto-removal Suspect a hardware problem (see Note 1).
BD0 FSM time out Suspect a problem in the service processor.
(see Note 2)
BE0 Watchdog time out
2-32 3745 Models 130 to 17A: MIP