Filter
Top Products
Service Processor MAPs
001 (continued)
Is the problem permanent?
Yes No
002
Go to Step 016 on page 2-44.
003
Does the problem appear on all units connected to the service processor?
Yes No
004
Go to Step 011.
005
Is the service processor powered ON?
Yes No
006
Power ON the service processor.
Is the service processor powered ON?
Yes No
007
Go to Step 010.
008
Problem solved.
009
Check that the service processor LAN cables are correctly connected to the rear of the service
processor
Check that the LAN cables are correctly connected to the service processor access unit.
If everything is correct continue with Step 010.
010
Go to Service Processor Problem Determination in the corresponding
Service Processor Installation
and Maintenance
manual.
011
Is the problem only on a 3745?
Yes No
012
In the following list, select the unit that has a problem:
Faulty Unit Action:
3746-900 Restart the problem determination using the
IBM 3746 Nways Multi-
protocol Controller Model 900 Service Guide
, SY33-2116.
3746-950 Restart the problem determination using the
IBM 3746 Nways Multi-
protocol Controller Model 950 Service Guide
, SY33-2108.
Network Node Processor Perform the problem determination on the network node processor
using the Network Node Processor Problem Determination in the
corresponding
Network Node Processor Installation and Maintenance
Chapter 2. Map for FRU Isolation 2-43