A SERVICE OF

logo

Open as PDF
next previous
3745 FRU Exchange Procedure
9. Attention: Use the ESD kit and procedures.
10. Refer to Figure 4-72. Remove the MOSS
board covers 1 (seven screws must be
removed 2).
11. Refer to Figure 4-73 .
12. Locate the FDD 3.
13. Remove the two cables 4 at the back of the
FDD.
14. Remove the four securing screws from the
assembly 5.
15. Slide the FDD assembly out.
Figure 4-72. MOSS Covers
P
Figure 4-73. FDD Removal
4-54 3745 Models 130 to 17A: MIP