Filter
Top Products
3745 MAPs
012 (continued)
Using Power Control scroll, till the value is
1.
Press Validate.
Re-initiate the command.
Is the 3745 powered ON?
Yes No
013
– Check for the 28 V between frame ground
and Power Hold/Power Pick on EPO
01S on:
Any J Connector pin 5 if one is free
(J5/6/7/8)
or
The back of any host connector if the
four are used.
Pin 1 Pin 4
Pin 3 Pin 6
J5 J6 J7 J8
Are the two lines ON?
Yes No
014
There is a host problem, or an
external host cable problem.
If no problem was found, contact your
support structure, refer to “Contacting
Support” on page A-1.
015
– Exchange the PCC card. Go to
“Exchange Precautions” on page 4-1.
016
– Intermittent problem. The host, host cable, or
PCC card can be suspected.
Chapter 2. Map for FRU Isolation 2-17