Diagnostics
Wrap Test Initial Selection for HPTSS
Follow the instructions in the following screen.
CUSTOMER ID: 3745-xxx SERIAL NUMBER:
CCA-A PROCESS MOSS-ALONE X71:A8
RESET BYP-IOC-CHK STOP-CCU-CHK X72:BC8
-------------------------------------------------------------- mm/dd/yy hh:mm
FUNCTION ON SCREEN: WRAP TEST
WRAP TEST INITIAL SELECTION FOR HPTSS
- ENTER LINE ADDRESS (124-139) ==> (B)
- ENTER WRAP TYPE (1 to 2) ==>
1 = DATA
2 = CONTROL LEADS
- ENTER WRAP LEVEL (1 to 4) ==> (C)
1 = LOCAL MODEM (DATA WRAP ONLY) 4 = TAILGATE
2 = REMOTE MODEM (DATA WRAP ONLY)
3 = INTERNAL
LINE(S) TO BE TESTED MUST BE DISABLED/DEACTIVATED
===>
F1:END F2:MENU2 F4:INITIAL SELECTION
(B) Enter the line address here.
(C) Enter 4 here to select the tailgate level.
For HPTSS
Install the wrap plug PN 58X9349 for V.35 or PN 58X9354 for X.21 on the tailgate connector.
3-18 3745 Models 130 to 17A: MIP
