Filter
Top Products
Diagnostics
If any other panel code is displayed, discon-
nect the wrap plug. Go to “3745 Control
Panel Codes” on page 1-15 and follow the
instructions.
9. Disconnect the wrap plug and reconnect the
cable.
10. Set service mode to NORMAL:
a. Press Service until 0 is displayed in the
function window.
b. Press Validate.
11. Set the function to MOSS IML:
a. Press Function until 1 is displayed in the
function window.
b. Press Validate.
12. When the control panel displays F0F or F0E if
the MOS was previously alone), perform a
MOSS online. Refer to “How to Put the
MOSS Online” on page 4-105.
13. The console link test has completed with no
error detected.
D
3745
Tailgate
Tailgate
Tailgate
Internal Cable
External Cable
(DCE Interface Cable)
Console
or
Modem
Console
or
Modem
Console
or
Modem
A
3745
Adapter
Internal Cable
External Cable
(DCE Interface Cable)
3745
7427
Internal Cable
External Cable
(DCE Interface Cable)
External Cable
(DCE Interface Cable)
MOSS
Board
MOSS
Board
MOSS
Board
B
C
Figure 3-3. Cable Configurations
Chapter 3. How to Run 3745 Diagnostics 3-7