Filter
Top Products
Diagnostics
How to Run the Wrap Test (WTT) for TSS, HPTSS, or 3746-900
Attention: The MOSS must be online to start this procedure.
1. Select Menu 1.
2. Type WTT
3. Press SEND/ENTER.
The Wrap Test Initial Selection screen is displayed:
CUSTOMER ID: 3745-xxx SERIAL NUMBER:
CCA-A PROCESS MOSS-ALONE X71:A8
RESET BYP-IOC-CHK STOP-CCU-CHK X72:BC8
-------------------------------------------------------------- mm/dd/yy hh:mm
FUNCTION ON SCREEN: WRAP TEST
WRAP TEST INITIAL SELECTION
- SELECT THE COMMUNICATION SUBSYSTEM (1, 2, 3) ==>
1 = TSS
2 = HPTSS
3 = 3746-9
THEN PRESS ENTR
===>
F1:END F2:MENU2
If you select:
1 = TSS: Go to “Wrap Test Initial Selection for TSS” on page 3-16
2 = HPTSS: Go to “Wrap Test Initial Selection for HPTSS” on page 3-18
3 = 3746-900: Go to “Wrap Test Initial Selection for 3746-900” on page 3-19
Chapter 3. How to Run 3745 Diagnostics 3-15