Filter
Top Products
Service Processor MAPs
manual.
Other unit If you have a unit other than a 3745, 3746-900, or 3746-950 con-
nected to the LAN, refer to the specific documentation of this unit or
do the problem determination on the ring using, the
Token-Ring
Network Problem Determination Guide
, SX27-3710.
013
Is there a panel code displayed on the 3745 control panel?
Yes No
014
Go to “3745 Control Panel Symptoms” on page 1-11.
015
Go to “3745 Control Panel Code” on page 2-32 for control panel code interpretation.
016
You are here because you have transient errors on the service processor LAN .
Does the problem appear on all units connected to the service processor?
Yes No
017
Go to Step 019.
018
Check that the service processor LAN cable is correctly connected to the rear of the service
processor.
Check that all the LAN cables are correctly connected to the service processor access unit.
Do the problem determination on the ring using, the
Token-Ring Network Problem Determination
Guide
, SX27-3710.
If you do not identify the problem, contact your support center.
019
Is the problem only on a 3745?
Yes No
020
Faulty Unit Action:
3746-900 Restart the problem determination using the
IBM 3746 Nways Multi-
protocol Controller Model 900 Service Guide
, SY33-2116.
3746-950 Restart the problem determination using the
IBM 3746 Nways Multi-
protocol Controller Model 950 Service Guide
, SY33-2108.
Network Node Processor Perform the problem determination on the network node processor
using the Network Node Processor Problem Determination in the
corresponding
Network Node Processor Installation and Maintenance
manual.
Other unit If you have a unit other than a 3745, 3746-900, or 3746-950 con-
nected on the LAN, refer to the specific documentation of this unit or
do the problem determination on the ring using, the
Token-Ring
Network Problem Determination Guide
, SX27-3710.
021
2-44 3745 Models 130 to 17A: MIP