Filter
Top Products
Diagnostics
Options Menu
CUSTOMER ID: 3745 SERIAL NUMBER:
CCU-A SELECTED PROCESS MOSS-OFFLINE X71:2415
X72:85
-------------------------------------------------------------- 3/6/87 :15
FUNCTION ON SCREEN: OFFLINE DIAGS
:
R RERUN REQUEST :
A ABORT ROUTINE :
C CANCEL REQUEST :
G GO :
M MODIFY OPTIONS: :
S/LS/AL/ALS/B/DM :
NW/W : START 9:58:15
C1/CNNN/C : REQUEST: CCU DIAGNOSTICS INITIALIZATION
R1/RNNN : OPTIONS: S NW C1 R1 BR
BR/NBR :
: ENTER REQUEST ACCORDING TO THE DIAG MENU
: ==>M R2
===>
F1:END F2:MENU2 F3:ALARM
Figure 3-6. How to Enter Options
When the OPT field is set to Y in the diagnostic
menu, the options menu is displayed. See
Figure 3-6.
The default options are automatically displayed.
Options: Meaning
S Stop on first error.
LS Loop on first error with stop.
AL Automatic loop on error.
ALS Automatic loop on error with new
error stop.
B Bypass error stop.
DM Display multiple errors.
NW No wait before execution of each
routine.
W Wait before execution of each
routine.
C1/CNNN/C Cycle request option.
R1/RNNN Repeat routine option.
BR/NBR BER recording option.
1. Enter or modify the option using the M func-
tion followed by the option or options needed
(for example : M C5 DM will cause your
request to cycle 5 times and display multiple
errors).
Only one option per line of the menu can be
selected. If more than one option is entered,
only the last one is accepted.
2. Press SEND
Restart the same procedure to enter the other
options if needed.
3. Enter G
4. Press SEND.
The diagnostic is started and the diagnostic
result is displayed on this frame.
If an error is detected, an error message is
displayed. See Figure 3-7 on page 3-12.
Chapter 3. How to Run 3745 Diagnostics 3-11