Filter
Top Products
Configuring the Controller using the Switches
156 AX2500/2850 Motor Controller User’s Manual Version 1.7. February 1, 2005
resetting the controller. All parameters, including Joystick limits will be reset to their
default values shown in the “Programmable Parameters List” on page 156
Exiting the Parameter Setting Mode
Exiting the Programming Mode can be done only by pressing the Reset button or powering
down the controller. The new parameters will be the ones in use after the controller is
reset or first powered up.
Programmable Parameters List
The following table shows the AX2500/2850’s controller parameters in the order they
appear during programming, as well as their valid values.
Important Notice
The parameter table below is guaranteed to be accurate only if your controller soft-
ware version number matches the one of this manual. See “Obtaining the Control-
ler’s Software Revision Number” on page 19 for instructions on how to find this
number.
This manual is for software version 1.7
If your controller has a more current software revision, please download an updated ver-
sion of this manual from the Roboteq web site at www.Roboteq.com.