Filter
Top Products
AX2500/2850 Motor Controller User’s Manual 69
Mode Description
SECTION 7 R/C Operation
This section describes the controller’s wiring and functions specific to the R/C radio control
mode.
Mode Description
The AX2500/2850 can be directly connected to an R/C receiver. In this mode, the speed or
position information is contained in pulses whose width varies proportionally with the joy-
sticks’ positions. The AX2500/2850 mode is compatible with all popular brands of R/C
transmitters. A third R/C channel can be used to control the On/Off state of two outputs
that may be connected to electrical accessories (valves, lights, weapons,...)
The R/C mode provides the simplest method for remotely controlling a robotic vehicle: little
else is required other than connecting the controller to the R/C receiver (using the provided
cable) and powering it On. For better control and improved safety, the AX2500/2850 can be
configured to perform correction on the controls and will continuously monitor the trans-
mission for errors.
Set
R
es
e
t
FIGURE 39. R/C radio control mode