Filter
Top Products
3-38 (E) Chapter 3 Operations for Linear/Nonlinear Editing
3-2 Operations for Nonlinear Editing (Operations in Cut Units)
3-2-7 Editing With Effects
Similar to a conventional BVE-series editor, by connecting a MAVE-D555
you can perform editing using dissolvable and wipe effects. You can also add
to or delete the effects after editing execution.
Notes
• A BKMA-560/561 must be installed in the MAV-555 in order to perform
edits with effects.
• The edit mode must be set for the OVERWRITE mode.
• If you attempt to execute effect editing in the INSERT/LIFT/EXTRACT
mode you will not be able to complete the execution and “EF Edit on Illegal
Mode” will be displayed.
• If you want to execute effect editing in the INSERT/LIFT/EXTRACT mode,
after executing one cut enter the trimming mode and perform an add to the
effect.
• When a material from the VTR is edited, effect editing cannot be done. In
order to perform effect editing with a cut captured from a VTR, after
performing the cut from the VTR enter the trimming mode and perfrom an
add to the effect.
For details about dissolvable and wipe editing and use of the AUDIO key, see the
MAVE-D555 operation manual.