Filter
Top Products
5.4 Network Dedicated Instruction
5.4.7 RLPASET instruction
5-139
G_RLPASET
5
MODULE DEDICATED
INSTRUCTION
G_RLPASET
5.4.7 RLPASET instruction
G_RLPASET
*1: Local devices and file registers per program cannot be used as setting data.
Function
This instruction sets the network parameters to the master station and starts up the data link.
G(P)_RLPASET
P: Executing condition
:
indicates any of the following
instructions.
G_RLPASET GP_RLPASET
Input argument EN:
Executing condition :Bit
Un*:
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
:ANY16
s1:
Variable that stores control data :Array of ANY16 [0..7]
s2:
Variable that stores slave station setting data :Array of ANY16 [0..63]
s3:
Variable that stores reserved station specification data :Array of ANY16 [0..3]
s4:
Variable that stores error invalid station specification data :Array of ANY16 [0..3]
s5:
Variable that stores send/receive and auto-refresh buffer
assignment data
:Array of ANY16 [0..77]
Output argument ENO:
Execution result :Bit
d:
Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
:Array of bit [0..1]
Setting
data
*1
Internal device
R, ZR
J\
U\G
Zn
Constant
Others
Bit Word Bit Word
CC-Link
Structured ladder/FBD
ST
G_RLPASET
EN ENO
Un*
s1
s2
s3
s4
s5
d
G_RLPASET
(EN, Un*, s1, s2, s3, s4, s5, d);
ENO:=
s1
s2
s3
s4
s5
d