Filter
Top Products
5-202
5.4 Network Dedicated Instruction
5.4.19 RSTOP instruction
Z_RSTOP_J, Z_RSTOP_U
5.4.19 RSTOP instruction
Z_RSTOP_J, Z_RSTOP_U
Z(P)_RSTOP_J
Z(P)_RSTOP_U
P: Executing condition
:
indicates any of the following
instructions.
Z_RSTOP_J ZP_RSTOP_J
Z_RSTOP_U ZP_RSTOP_U
Input argument EN:
Executing condition :Bit
Jn*:
Network number of the host station (1 to 239)
254: Network specified in
"Valid module during other station
access
"
:String
Un*:
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
:String
s1:
Channel used by host station :ANY16
s2:
Target station number
(1) Station number specification
Host station is Universal model QCPU: 1 to 120
Host station is anything other than Universal model QCPU: 1
to 64
(2) Group specification
81
H to A0H: All stations of a group (No.1 to 32)
(3) All stations
FF
H: All stations of the target network No. (Except the host
station)
:ANY16
s3:
Target station's CPU type
0000
H: Target station CPU/control CPU/host system CPU
(Specified data are the same as '03FF
H'.)
03E0
H: Multi-CPU No. 1/
target station CPU (single CPU system)
03E1
H: Multi-CPU No. 2
03E2
H: Multi-CPU No. 3
03E3
H: Multi-CPU No. 4
03FF
H: Target station CPU/control CPU/host system CPU
:ANY16
s4:
Specify options for the operation mode and clear mode.
(1) Operation mode
1
H: No forced execution
3
H: Forced execution
(2) Clear mode
0
H: Do not clear
(Note that the local devices are cleared.)
1
H: Clear (excluding the latch range)
2
H: Clear (including the latch range)
:ANY16
Output argument ENO:
Execution result :Bit
d:
Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
:Array of bit [0..1]
CC IE C
NET/H
Structured ladder/FBD
EN ENO
Jn*
d
s1
s2
s3
s4
Z_RSTOP_J
EN ENO
Un*
d
s1
s2
s3
s4
Z_RSTOP_U
ST
Z_RSTOP_J
(EN, Jn*, s1, s2, s3, s4, d);
ENO:=
Z_RSTOP_U
(EN, Un*, s1, s2, s3, s4, d);
ENO:=