Filter
Top Products
5-2
5.1 Analog Instruction
5.1.1 OFFGAN instruction
G_OFFGAN
5.1 Analog Instruction
5.1.1 OFFGAN instruction
G_OFFGAN
*1: Local devices and file registers per program cannot be used as setting data.
Function
This instruction converts the mode of analog modules. (normal mode to offset/gain setting mode,
offset/gain setting mode to normal mode)
G(P)_OFFGAN
P: Executing condition
:
indicates any of the following
instructions.
G_OFFGAN GP_OFFGAN
Input argument EN:
Executing condition :Bit
Un*:
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
:ANY16
s:
Mode switching
0: To normal mode
1: To offset/gain setting mode
:ANY16
Output argument ENO:
Execution result :Bit
Setting
data
*1
Internal device
R, ZR
J\
U\G
Zn Constant Others
Bit Word Bit Word
Structured ladder/FBD
ST
G_OFFGAN
EN ENO
Un*
s
G_OFFGAN
(EN, Un*, s);ENO:=
s