Filter
Top Products
5.4 Network Dedicated Instruction
5.4.12 SEND instruction
5-169
J_SEND, G_SEND
5
MODULE DEDICATED
INSTRUCTION
J_SEND, G_SEND
[0]
Execution/Error completion
type
Error completion type (bit 7)
Specify the clock data setup status at the time of error completion.
0: Clock data at the time of error completion is not set in the area
starting from [11].
1: Clock data at the time of error completion is set in the area starting
from [11].
0000H,
0001
H,
0080
H,
0081
H
User
[1]
Completion status
The instruction completion status is stored.
0 : Normal completion
Other than 0 : Error completion (error code)
–
System
[2]
Channel used by host
station
Specify the channel used by the host station.
1 to 8 User
[3]
Target station channel
Specify the channel of the target station that stores data.
*2
1 to 64 User
[4]
Target station network No.
Specify the network number of the target station.
1 to 239 : Network number
254 : Specify this when 254 has been set in Jn.
(Network specified in 'Valid module during other
station access')
1 to 239, 254 User
Device Item Setting data Setting range Setting side
s1
s1
s1
s1
s1
Description Setting value
Ethernet
MELSECNET/H
CC-Link IE Controller Network
1 to 8
CC-Link IE Field Network 1 to 2
s1
Description Setting value
MELSECNET/H 1 to 64
Ethernet
CC-Link IE
1 to 8
s1