Filter
Top Products
5-178
5.4 Network Dedicated Instruction
5.4.13 RECV instruction
J_RECV, G_RECV
Program Example
The following program reads out data, which is sent from the station number 1 by the SEND
instruction, from the channel 5 of the station number 2 (host station) and stores the data to the
devices from D770 to D773 of the station number 2 (host station) when SB0034 turns ON.
For the SEND instruction, refer to the following section.
Section 5.4.12 SEND instruction
[Structured ladder/FBD]
Sets error
completion type
Sets host station
channel
Sets arrival
monitoring time
Performs readout
Execution finished
Normal completion
Error completion
Stores error code
Process on completion of readout
Process on normal completion
Process on error completion