Filter
Top Products
5.4 Network Dedicated Instruction
5.4.20 RTMRD instruction
5-205
Z_RTMRD_J, Z_RTMRD_U
5
MODULE DEDICATED
INSTRUCTION
Z_RTMRD_J,
Z_RTMRD_U
5.4.20 RTMRD instruction
Z_RTMRD_J, Z_RTMRD_U
*1: Local devices and file registers per program cannot be used as setting data.
Z(P)_RTMRD_J
Z(P)_RTMRD_U
P: Executing condition
:
indicates any of the following
instructions.
Z_RTMRD_J ZP_RTMRD_J
Z_RTMRD_U ZP_RTMRD_U
Input argument EN:
Executing condition :Bit
Jn*:
Network number of the host station (1 to 239)
254: Network specified in
"Valid module during other station
access
"
:String
Un*:
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
:String
s1:
Channel used by host station :ANY16
s2:
Target station number
Host station is Universal model QCPU: 1 to 120
Host station is anything other than Universal model QCPU: 1
to 64
:ANY16
s3:
Target station's CPU type
0000
H: Target station CPU/control CPU/host system CPU
(Specified data are the same as '03FF
H'.)
03E0
H: Multi-CPU No. 1/
target station CPU (single CPU system)
03E1
H: Multi-CPU No. 2
03E2
H: Multi-CPU No. 3
03E3
H: Multi-CPU No. 4
03FF
H: Target station CPU/control CPU/host system CPU
:ANY16
Output argument ENO:
Execution result :Bit
d1:
Variable that stores read clock data :Array of ANY16 [0..3]
d2:
Variable that turns ON upon completion of the instruction
d2[1] also turns ON at the time of error completion.
:Array of bit [0..1]
Setting
data
*1
Internal device
R, ZR
J\
U\G
Zn
Constant
K, H
Others
Bit Word Bit Word
CC IE C
NET/H
Structured ladder/FBD ST
EN ENO
Jn* d1
d2
s1
s2
s3
Z_RTMRD_J
EN ENO
Un* d1
d2
s1
s2
s3
Z_RTMRD_U
Z_RTMRD_J
(EN, Jn*, s1, s2, s3, d1, d2);
ENO:=
Z_RTMRD_U
(EN, Un*, s1, s2, s3, d1, d2);
ENO:=
s1
s2
s3
d1
d2