Filter
Top Products
5-184
5.4 Network Dedicated Instruction
5.4.15 REQ instruction
J_REQ, G_REQ
Control Data
Device Item Setting data Setting range Setting side
[0]
Error completion type
Error completion type (bit 7)
Specify the clock data setup status at the time of error completion.
0: Clock data at the time of error completion is not set in the area starting
from [11].
1: Clock data at the time of error completion is set in the area starting
from [11].
0011H,
0091
H
User
[1]
Completion status
The instruction completion status is stored.
0 : Normal completion
Other than 0 : Error completion (error code)
–
System
[2]
Channel used by host
station
Specify the channel used by the host station.
1 to 8: Channel
1 to 8 User
[3]
Target station's CPU type
Specify the type of the target station CPU.
0000H,
03FF
H
User
0000H,
03E0
H to
03E3
H,
03FF
H
[4]
Target station network No.
Specify the network number of the target station.
1 to 239 : Network number
254 : Specify this when 254 has been set in Jn.
(
Network specified in 'Valid module during other station
access')
1 to 239, 254 User
s1
b15b7 b0toto b4to
0 1001
1
s1
s1
s1
s1
s1
Setting value Description
Ethernet
0000H
Target station CPU/host system CPU
(Specified data are the same as '03FFH'.)
03FFH
*1
Target station CPU/host system CPU
MELSECNET/H
CC-Link IE
0000H
Target station CPU/host system CPU
(Specified data are the same as '03FFH'.)
03E0H
*2
Multi-CPU No. 1/target station CPU (single
CPU system)
03E1H
*2
Multi-CPU No. 2
03E2H
*2
Multi-CPU No. 3
03E3H
*2
Multi-CPU No. 4
03FFH
*1
Target station CPU/host system CPU
s1