Dell iDRAC8 Universal Remote User Manual


 
Managing Rack Density
Suppose two servers are installed in a rack. To add two additional servers, need to determine how much
capacity is left in the rack.
To assess the capacity of a rack to add additional servers:
1. View the current power consumption data and historical power consumption data for the servers.
2. Based on the data, power infrastructure and cooling system limitations, enable the power cap policy
and set the power cap values.
NOTE: It is recommended that you set a cap close to the peak, and then use that capped level
to determine how much capacity is remaining in the rack for adding more servers.
Installing New Electronic License
See License Operations for more information.
Applying I/O Identity Configuration Settings for Multiple
Network Cards in Single Host System Reboot
If you have multiple network cards in a server that is part of a Storage Area Network (SAN) environment
and you want to apply different virtual addresses, initiator and target configuration settings to those
cards, use the I/O Identity Optimization feature to reduce the time in configuring the settings. To do this:
1. Make sure that BIOS, iDRAC, and the network cards are updated to the latest firmware version.
2. Enable IO Identity Optimization.
3. Export the XML configuration file from iDRAC.
4. Edit the I/O Identity optimization settings in the XML file.
5. Import the XML configuration file to iDRAC.
Related Links
Updating Device Firmware
Enabling or Disabling I/O Identity Optimization
344