Filter
Top Products
Object Description Usage Example
FanSpeedMax
OffsetVal
• Getting this variable reads
the fan speed offset value
in %PWM for Max Fan
Speed Offset setting.
• This value depends on
the system.
• Use FanSpeedOffset to
set this value using index
value 3
Values from 0-100
racadm get
system.thermalsettings
FanSpeedMaxOffsetVal
This returns a value such as “100”.
This means that when you use the
following command, it applies a fan
speed offset of Max (meaning full
speed, 100% PWM). In most cases,
this offset results in fan speeds
increasing to full speed.
racadm set
system.thermalsettings
FanSpeedOffset 3
FanSpeedMed
iumOffsetVa
l
• Getting this variable reads
the fan speed offset value
in %PWM for Medium Fan
Speed Offset setting.
• This value depends on
the system.
• Use FanSpeedOffset
object to set this value
using index value 2
Values from 0-100
racadm get
system.thermalsettings
FanSpeedMediumOffsetVal
This returns a value such as “47”.
This means that when you use the
following command, it applies a fan
speed offset of Medium (47% PWM)
over baseline fan speed
racadm set
system.thermalsettings
FanSpeedOffset 2
FanSpeedOff
set
• Using this object with get
command displays the
existing Fan Speed Offset
value.
• Using this object with set
command allows setting
the required fan speed
offset value.
• The index value decides
the offset that is applied
and the
FanSpeedLowOffsetVa
l,
FanSpeedMaxOffsetVa
l,
FanSpeedHighOffsetV
al
, and
FanSpeedMediumOffse
tVal objects (defined
earlier) are the values at
which the offsets are
applied.
Values are:
• 0 - Low Fan
Speed
• 1 - High Fan
Speed
• 2 - Medium
Fan Speed
• 3 - Max Fan
Speed
• 255 - None
To view the existing setting:
racadm get
system.thermalsettings.FanS
peedOffset
To set the fan speed offset to High
value (as defined in
FanSpeedHighOffsetVal)
racadm set
system.thermalsettings.FanS
peedOffset 1
MFSMaximumL
imit
Read Maximum limit for MFS
Values from 1 -
100
To display the highest value that
can be set using
MinimumFanSpeed option:
racadm get
system.thermalsettings.MFSM
aximumLimit
58