Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 135
07/07
Making the FAULT RELAY Operational
Fig. 8–5. Enabling the FAULT RELAY.
1. On the System tab, add a checkmark to: Enable Status Pulse or to it and Monitor Alarm
Reporting. See figure
8–5, above.
2. On the Events tab, click the Outputs subtab.
3. The name of Output 6 has changed to “System Status Pulse”. You have the option of
changing the name, by typing in the box.
Fig. 8–6. Enabling the FAULT RELAY Changes the Name of Output6.
Camera Signal Format
• NTSC / PAL. Signal type is a global setting for all cameras.