Filter
Top Products
Multi-Media Alarm Stations
220
Precaution
Before de-listing a Multi-Media unit or Multi unit from a Multi-Media database, Honeywell
recommends that your Multi SA use Admin software to remove Alarm Stations listed in a site
definition. See the procedure::
To Set a Site to Not Report to a Specific Alarm Station, next.
To Set a Site to Not Report to a Specific Alarm Station
1. Using Admin, click the Sites tab.
2. Double-click the name of the site that you plan to remove. An Update Site window is
displayed.
3. Click
in the “Report Alarms to these Alarms Stations” pane. The Add/Delete
Stations to Call in Case of Alarms dialog box appears, displaying a list of alarm stations.
Stations already assigned to the site are listed the Report Alarms to column.
4. To move alarm station names to the Alarm Stations available column, either:
• Select one or many station names in the Report Alarms to column, then click the
left-arrow, or
• Double-click the ones that you want to move.
5. Click Save and Close. The Add Site/Update Site dialog box reappears, listing the alarm
stations in the Report Alarms… pane.
6. You have the option of ending the site edit. To do so, click Save and Close. The Admin
window reappears, listing your system’s sites on the Site tab.
7. Use View to start a
Maintenance Session for the Multi-Media unit that you plan to
remove.
8. Click Update security on the Security tab of the Maintenance Session. Information from
the Multi db is copied to the Multi-Media unit. Please wait until “Updated security”
appears in the Feedback box.
9. Close the Maintenance Session.
10. Using Admin, remove the site.
11. Using View, click Refresh.