Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 243
07/07
Logging On
For routine use of Admin
After specifying a database, Admin and View will continue to use it, each time that you log on.
Logging on to Admin is a simple matter of starting Admin (as explained in
Starting Admin on
p.
232) and clicking OK.
Tip
To log on to Admin, use either:
(a) the Administrator account, or
(b) an account with the “Use settings from Administrator” property.
The “first use” exception
On first use, you are offered an empty, default Multi database. To obtain a Multi central database,
see
Obtaining a Multi db on p. 232.
View: Setting the Db
Fig. 14–7. The Log On to View.
The first time that you use View...
The View operator needs to set View to use a Multi central database (Multi db).
Tip
For mobile PCs that will not have access to the Multi db, have the multi SA connect the PC
at least once to the Multi db and have that user log on.
When a different Multi db is used at View’s logon, the local db is overwritten with contents from the
most recent Multi db.