Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 55
07/07
Making a Site Operational
A Multi-Media unit is “working” within minutes of being turned on. There are a few crucial steps
needed to make your Rapid Eye site an outstanding security tool.
The first Maintenance Session
You run the first Maintenance Session at a site after:
• Adding that site to a Multi central database. See
Naming / Renaming a Site on p. 24
• Upgrading a Multi unit.
Site registration
When the first Maintenance Session runs, the validity of the communication data to the site can be
checked. If correct, the site is registered automatically, making it available to View operators who
have the right to use it.
Fig. 4–1. Multi-Media Unit Serial Number and Version of Unit Software.
The Multi-Media unit has a serial number and software version. These numbers are displayed on
the System tab, as illustrated in fig.
4–1, and on the Hardware tab.
Tip
Someone has to run a Maintenance Session on a unit before he or any other View operator
can run Live Sessions.
One Maintenance Session is enough to register a site for all users of that site.
Honeywell recommends setting a unit to the correct time zone, time and date before using
the unit in your organization's operations.