Filter
Top Products
Document K14392V1 Rev A 23
07/07
2
Multi-Media Site: Name
Preparations
Road map
A Multi-Media site refers to one Multi-Media unit. Even when there are many units at a “company
site”, each unit is considered as one Rapid Eye site. Before setting-up Rapid Eye sites for use by
View operators, your Multi System Administrator (Multi SA) should check if:
• Hardware at the Multi site is installed.
• Admin and View software are installed. See
Right to Use Admin on p. 180.
• Multi central database is available. Obtained using Admin. See
Multi Database, p. 231.
• If the Time zone, Clock, the IP address of the unit may have been already set, onsite, using
LocalView. See the
Multi-Media DSP Unit: Quick Install broadsheet, K14355.
Cameras
The Cameras... button is useful after you run a
Maintenance Session for the site. It lists the names
assigned to each camera during the Maintenance Session.
Last valid password
Use of the LVP button is explained fully at
Last Valid Password, on p. 174.
Uninformed use of the LVP utility can make a unit unusable and deny access to the unit for
all users, including a Multi SA. When adding a new Multi site to your Rapid Eye system,
do not use the “LVP" (last valid password) utility, even if you have set a system password
on other units.
The LVP utility is for dealing with replacement Multi-Media units, or mistakenly deleted sites; see
Last Valid Password, on p. 174.