Filter
Top Products
Multi-Media Alarm Stations
216
RAS Connection to an Alarm Station
Fig. 11–12. A Multi-Media Unit Can Send Alarms through a RAS Server.
In a nutshell
A Rapid Eye site may need to connect to a remote access service (RAS) server to reach a Multi
alarm station. Figure 11–13 shows a telephone number to a server’s modem. The number is dialed
first (1); PPP authentication occurs. Alarms can then reach the alarm station using the unit’s
IP address (2).
Fig. 11–13. RAS Configuration.
What your network administrator needs to know
Alarms are sent to port 10,003. This port should be left open in your organization’s firewall, for the
sockets used by Multi alarms.