Filter
Top Products
Video Feed Setup
80
NTSC gauge
The NTSC gauge is shown in figure
5–15. (1) shows a dot that indicates the resolution of video.
The dot changes position when recording settings switch to and from Continuous Recording
settings to Event Recording settings. Here, 640 x 240 continuous, is shown for NTSC. While
Event Recording occurs (2), the dot moves to the right. When the Event Recording stops (3), the
resolution gauge again shows the resolution setting for continuous recording.
Fig. 5–15. Resolution Gauge for Recordings Made with NTSC Cameras.
The dots movement depends on the settings made by your organization's Multi SA for
Continuous Recording and
Event Recording.
PAL gauge
The gauge for PAL is shown in figure 5–16. (1) shows a dot that indicates the resolution of video.
The dot changes position when recording settings switch to and from Continuous Recording
settings to
Event Recording settings. Here, 384 x 288 continuous, is shown for PAL. While Event
Recording occurs (2), the dot moves to the right. When the Event Recording stops (3), the
resolution gauge again shows the resolution setting for continuous recording.
The dots movement depends on the settings made by your organization's Multi SA for
Continuous Recording and
Event Recording.
Fig. 5–16. Resolution Gauge for Recordings Made with PAL Cameras.