Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 149
07/07
To Enable Audio for Use Onsite, by LocalView
1. On the Audio Setup tab, add a checkmark to the box for Channel 2 (Right) Used by Site
Operator for Local Audio Monitoring. The "channel 2" Enable, Record and name become
unavailable; they are not needed for monitoring audio by a LocalView operator.
2. In the Channel 1 controls, add checkmarks to the Enable boxes for Talk, Listen or both,
as needed.
3. You have the option of adding checkmarks to Record boxes for Talk, Listen or both, as
needed. The Enabled box needs to be checked before its Record box can be.
To Disable Audio for LocalView
• Using either View (or LocalView), on the Audio Setup tab, remove the checkmark in the
checkbox for Channel 2 (Right) Used by ...
Multi-Media LT Audio Resources
There is only one channel of audio on Multi-Media LT units. For audio use, see the Multi-Media LT
Unit Installation Instructions.
Eagle Audio
Eagle Audio is discussed in the Multi and Eagle Audio Configuration Guide, part number K9203.
Please contact your Multi distributor if you need information about Eagle Audio.
Tip
Multi Audio differs from Eagle Audio, which is an optional, third party, audio interface.
Events
For Multi events, please see Events Defined, p. 187.
Simultaneous Sessions From One Unit
Table 8–7 lists the number of streams available to operators. Table 8–8 shows how many
operators can obtain the streams that are left available. For example, on one unit, two operators
could both view 16 live cameras, each. If ten operators are running Live sessions on a unit, each
could view three or four cameras (either the same cameras or others), for a total of 32. For live
audio, the ten connected operators could each hear the two channels of audio, and each could
monitor all data streams.
Table 8–7 Stream Availability
Session Video Audio Data
Live 32
all streams × connected users* all streams × connected users*
Retrieval 32 16 16
* All of the unit's streams are available, to as many operators that can connect; see table 8–8.