Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 67
07/07
resolution of images is automatically adjusted for an optimal view of the video feed. See the
Rapid
Eye View Software Operator Guide, for more procedures and tips about live video.
Tip
The resolution of recorded video is setup in a Maintenance Session and does not change
when View software automatically optimizes the resolution of live video.
Smoothing video
Video smoothing is an option of View, set by the View operator. It adds a load to the operator's
CPU and can slow busy systems. The result of video smoothing is not recorded; it can be toggled
OFF/ON while watching recorded video or while monitoring Live video. In a Maintenance Session,
video smoothing can be seen in the Enhanced Preview window. See
The Enhanced Preview of
Resolution, p.
74. See also the Rapid Eye View Software Operator Guide.
Other Video Settings
Fig. 5–2. The Video Tab: Color, Recording Settings, Motion and PTZ.
Color
You have the option of specifying if a color video feed is viewed in color or in black and white
(b&w). Removing the checkmark from the Color box on the Video tab shows the video feed in
b&w. See figure
5–1, above. Color continues to be recorded and can be toggled in/out, as
needed.
Recording settings
Use the Recording tab to setup the Continuous video recording settings. The values are reported
on the Video tab. See Recording Video: Continuous Recording Settings, p. 68.
Motion
For
Motion Detection, see p. 116.