Filter
Top Products
Security for a Multi-Media System
170
Fig. 10–4. After Removing a System Password.
Remove From All Units
1. Run Admin to access the System Password window. Either:
• Click
on the Admin toolbar.
• Click the System Password command on the File menu.
• Press the F8 key.
2. Remove the password in the System Password box.
3. Remove the password in the Confirm Password box; the System Password window
should look like fig.
10–4, above.
4. Click Save and Close.
5. Using View, start a Maintenance Session for a site. Either:
• Right-click the site name (on the Site tab); select Maintenance from the menu.
• Select the site; then click the Maintenance command on the Actions menu.
• Select the site; then click on the toolbar.
6. Click the Security tab in the Maintenance window.
7. Click Update security on the Security tab. You have the option of
Ending Maintenance;
see p.
62.
8. Repeat steps 5 to 7 for each Multi-Media unit in your system.
9. The Multi SA needs to tell users who use the sites whose System password has been
changed, to refresh their copy of the Multi db, the next time that they use View. See
Refreshing a Local Database, on p. 244.