Filter
Top Products
Configuring Other Hardware
142
Fig. 8–8. Monitor Out Tab, for a Multi-Media Unit’s MONITOR OUTPUT 1.
Table 8–5 Inputs for External Control of MONITOR OUTPUT 1
General Purpose Input Instructs Video Capture Card to...
13 display previous camera
14 display next camera
15 continue or pause public display monitor*
* A selection of video feeds from one unit for use with a public display monitor is very different
from: (a) site tours, involving many Rapid Eye sites (see Touring Many Sites, on p. 221) or
(b) PTZ tours: preset PTZ movements (see
Pan, Tilt, and Zoom (PTZ) Setup). Use of a local user
interface is also unrelated to these public display monitor settings.
Using LocalView As an Additional Public Display Monitor
For a better public display of video, Honeywell recommends using a dedicated NTSC (or PAL)
monitor, rather than the VGA output used for LocalView. Nonetheless, you have the option of
using the VGA monitor displaying LocalView as a public display monitor or as a second public
display monitor (in addition to a dedicated monitor). Set Local View to display the camera(s) that
you need. More than one camera can be displayed simultaneously.