Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 89
07/07
Using the Dartboard Control
Fig. 6–3. Dartboard Control for PTZ camera, Showing Command Feedback.
1. On the PTZ Control, click either Click or Hold.
2. Move the mouse pointer over the dartboard-like control to highlight areas of the
dartboard. Each area on the dartboard offers textual feedback in the box, below the
control. See figure
6–3.
3. Click when the command that you need is highlighted. If you are using the Hold option,
the mouse button can be held pressed to make the command last as needed.
Toggling between Zonal Mode and Pull Mode
1. In a Live player, select a PTZ camera.
2. In the View menu, select Options.
3. Click Zonal PTZ Control Mode.
• If there is no checkmark next to the command, Zonal mode is enabled and
replaces the Rubber-Band-like control (Pull Mode).
• If there is a checkmark next to the Zonal PTZ Control Mode command, Zonal
mode is replaced by the Rubber-Band control.
Tip
The rubber-band control cannot be used at the same time as the zonal mode control, and
vice-versa.