Filter
Top Products
Configuring Other Hardware
138
Serial Device: Modem
Flexibility
A dial-up connection is optional. Internal modems in Multi-Media units can remain unused. are set
using the Serial Devices tab.
Modem settings
Modems are set using the Serial Devices tab. The Serial Devices tab shows an Internal Port that
lists a modem or nothing at all. If the Internal Port holds a modem, the modem cannot be deleted.
The internal port cannot receive devices from the “New devices” or the “Unassigned devices”
groups.
Caution: Changing modem values in the next step can make the unit unavailable for dial-up
connection. If you are unsure, see your Multi SA.
Viewing/Changing Modem Settings
1. Continue or start a Maintenance Session for the Rapid Eye site. Please wait until a
“System Operational” message appears.
2. Click the Serial Devices tab.
3. Click the “Internal Port - Modem” icon. Boxes appear in the right half of the Serial
Devices tab: Baud Rate, Wait for connection, and so on. The box’ names and their
default values are listed in table
8–3, below.
4. You have the option of changing the values, as needed.
Fig. 8–7. Serial Devices Tab Showing “Internal Port–Modem” Data.