Honeywell K14392V1 DVR User Manual


 
Multi-Media Site: Name
28
Removing a Site
Honeywell recommends that before deleting a site definition, you remove the system password
from that Multi-Media unit. See
Removing a System Password, on p. 169. You do not need to
remove the system password from all sites; only on the unit being deleted from your Multi db.
If the site password is not removed from the unit, you will need to remember it when you
create another site definition for that Multi-Media unit. The system password is also
needed if you delete a site definition by mistake.
To Delete a Site
Deleting a site in the Multi central database has no effect on the Multi-Media unit at that site. The
unit continues to record video, send alarms and so on, even once the local databases of users are
refreshed. The unit’s system password remains in force.
1. You have the option of going to the Rapid Eye Site to physically disconnect the Multi-
Media unit from its means of communications.
2. Check if a system password is in use. If so, you have the option of removing the system
password from the Multi-Media unit. If you do not need to protect the video and other
recorded data from access, it is strongly recommended that you remove the system
password from the unit. See
Removing a System Password, on p. 169.
3. Using Admin, select a site name, listed on the Sites tab.
4. Remove the site by either:
Press the Delete key on the keyboard,
Click Delete on the Actions menu, or click on the toolbar.
Right-click the site name; then click Delete on the menu that appears.
5. The site’s dependencies are listed. Confirm that you want to delete the site.
Mistakenly Deleting a Secured Site Definition
When a system password is in use and a site is deleted by mistake, you need a few extra steps to
re-enter the site definition. The system password is left in use on the unit, by default. For the
procedure to re-enter information about a mistakenly deleted site that is protected by a system
password, see
Last Valid Password, on p. 174. You can read about how to add a site in Naming /
Renaming a Site, on p.
24.