Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 205
07/07
Network Connection to an Alarm Station
Tip
Your Rapid Eye site might not need this type of connection to an alarm station.
For other means of connecting to an alarm station, see table
11–2 on p. 204.
Fig. 11–2. Over a Network, Alarm's Are Sent to an Alarm Station’s IP Address.
To Setup a Network Connection to an Alarm Station
1. While adding or updating an alarm station definition in the Add Alarm Station/Update
Alarm Station dialog box, select Use Existing Network Connection.
2. In the IP Address box, type the alarm station’s address. An IP Address is mandatory for
a network connection.
3. Click Save and Close. The Alarm Stations tab appears. In the tab’s Connection Method
column, the first letter of “network” appears in parentheses: “(n)”, followed by the
IP address used to connect to the alarm station.
4. The next step is
Making an Alarm Station Operational; see p. 218.