Filter
Top Products
Pan, Tilt, and Zoom (PTZ) Setup
88
Table 6–1 PTZ drivers for controllers and domes
Driver (name)* Baud (rate) Support for (dome/controller/PIT device)
Bossware 19200 PIT device, to which domes are connected.
Honeywell Fixed Camera 9600 Honeywell HCU484
Intellibus 38400 ACUIX dome camera
Javelin 308 9600 Javelin 308 Controller
Kalatel 9600 or 2400 Kalatel KTD 312 Cyberdome
Pelco D 4800, 9600, or 2400 Pelco D
Pelco P 2400 Pelco P
Rapid Dome/Orbiter 9600 RapidDome or Orbiter
SensorMatic RS422 4800 SensorMatic RS422: Delta and Speed
Ultrak (using VCL) 2400 Ultrak (configured as VCL)
Ultrak KD6 9600 KD6, HD6, HD6i
* The drivers are not listed alphabetically in the software. A driver can be used with domes other
than those listed. For other domes, controllers or PIT devices, consult their documentation.
Using a PTZ Camera
Three PTZ controls are available to make PTZ commands: a dartboard-like control, a rubber band
control and a Zonal Mode control.
Either is available while running a Live session or while using LocalView. The right to use a PTZ
camera is granted in the operator’s Multi-Media account; see
Granting Rights, p. 158.
To Display the PTZ Dartboard Control
The PTZ dartboard control can be obtained in three situations:
• During a
Maintenance Session, when PTZ is selected, the PTZ control is displayed on the video
tab. See the first steps of procedure
To Enable a PTZ Camera, above.
• During a Live session, select or add a video stream from a PTZ camera. Click
, the "Enable
PTZ Control" button.
• In LocalView, a “PTZ” button is shown when a Live tab is selected. It is available when a PTZ
camera is selected.