Filter
Top Products
Video Feed Setup
74
Making Optimized Resolution and Frame Rate Settings
In the Automatic DSP Performance Maximization window (see fig. 5–8), double-click an "automatic
option".
Manual display of Maximization window
To display the Automatic DSP Performance Maximization window, click the "Configure Automatic
Optimizations" command, after right-clicking on the Recording tab. See fig.
5–9.
Fig. 5–9. The Configure Automatic Optimizations Command.
The Enhanced Preview of Resolution
1. Continue or start a Maintenance Session for the Rapid Eye site.
2. On the Video tab, select a camera name in the Name column. The Enhanced Preview
button is available if the camera is recording. A camera that is recording is identified by a
red dot, between its icon and name.
3. Click Enhanced Preview. In figure 5–10, below, the detail (1) shows a feed recorded at
a low resolution of 160 x 120, at the size that it would appear on a monitor. The outlines
(2) show the optimal size of a video feed on the PC’s monitor for that resolution. The
many circled resolution labels (3) can be used to display another recording resolution.
4. You have the option of experimenting with:
• Viewing the video feed at optimal size for a resolution. Click on the resolution
labels, within a resolution outline or use the Resolution setting on the Recording
tab.
• Stretching the video image. To compare resolutions at other “image sizes”, drag
the lower-right corner of the video image. The Image Size box reports the size of
the stretched image.
• Displaying or hiding outlines and labels on the video preview. Select Show
outlines and Show resolution labels as needed.