Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 175
07/07
If the site is still inaccessible, contact
Multi technical support, as explained in For Questions,
on p.
22.
Fig. 10–6. Inputting a Previous Owner’s System Password into the LVP Utility.
To Re-enter a Site Definition for a Unit with a System Password
Tip
When a system password is in use and a site is deleted by mistake, you need a few extra
steps to re-enter the site definition.
1. While adding a site (see Naming / Renaming a Site on p. 24), click LVP. A Match the
Password at Unit dialog box appears.
2. Type the system password that was securing the unit.
3. Confirm the password.
4. Click Save and Close.