Filter
Top Products
Document K14392V1 Rev A 65
07/07
5
Video Feed Setup
Cameras
Automatic detection
A Multi-Media unit detects cameras that are powered and connected to it, when the unit is
powered or rebooted.
Using a Maintenance Session
To setup a video feed, continue or start a
Maintenance Session for the Rapid Eye site; how to do
so is explained on p.
53.
Fig. 5–1. The Video Tab: Camera Names and Image Settings.
Renaming a Camera
1. Continue or start a Maintenance Session.
2. On the Video tab, select the name of a camera in the Name column. Cameras have
default names of “Camera1”, “Camera2”, and so on.
3. Click the name of the camera once more; a box appears around the name.
4. Type a new name. See figure
5–1.