Filter
Top Products
System Administrator’s Guide
Document K14392V1 Rev A 73
07/07
Automatic display of Maximization tool
If settings are too high, the "DSP Bandwidth Utilization", the Automatic DSP Performance
Maximization window is displayed. See figure
5–8.
Fig. 5–8. The Automatic DSP Performance Maximization Window.
Optimization options
The list of options changes depending on:
• The use of NTSC or PAL
• The number of cameras connected to the unit. Optimization cannot be used if the cameras are
not connected contiguously. See
Optimizing Recorded Video, p. 72.