Filter
Top Products
116
(3) Method for clearing an error by executing the command of the slave station
The following shows how to clear an error by executing the command of the slave station. Moderate errors and
Out-of-range digital value can be cleared.
1. Select the D/A converter module in "List of stations"
on the "CC IE Field Configuration" window.
2. Open the "Command Execution of Slave Station"
window.
[CC IE Field Configuration] [Online]
[Command Execution of Slave Station]
3. Set "Method selection" to "Error clear request" and
click the button.
4. When the window shown on the left is displayed,
click the button.
5. The error for the D/A converter module is cleared.
List of
stations